I wrote this article about this cool switch in my monthly column in 20th Century Guitar magazine, back in 2004. I'm installing one in a current job, and they are still great. and super-easy to install! Visit Derek at bigdguitars.com
Sorry to have not posted in so long! I've been busy with life and the shop. I hope to be back more regularly!
This is a great 1977 Gibson ES-355 TD, that needs a bit of love. It's a guitar I bought from a client, who purchased it in this sorry state, and no longer wanted anything to do with it. The guitar had no pickups, the fingerboard had been removed (despite no good reason to do so) and the pickups had been cut out and lost. Don't worry, the fingerboard is intact and perfect, simply needing to be reglued!
The pickguard had crumbled into dust, causing tremendous corrosion to the gold-plated hardware. Sigh. This post, focuses on the rebuilding of the pick guard. First, I carefully removed all the degraded material, preserving the binding, intact and perfect. The old cellulose nitrate material they used simply self-destructs, and the off-gassing caused the aforementioned corrosion of hardware.
I found a really nice piece of modern faux-tortoise in my shop...not the annoying, terrible-looking red stuff, but an elegant pattern in light brown swirls. Cutting it out on the bandsaw, then contouring it perfectly on the spindle sander was all the was needed to fit the original pick guard's binding around the new piece. Using artist's tape, I glued the binding on, then carefully sanded the glue squeeze-out away, preserving the time-faded tint of the binding. You can see in the photos how well it looks with this old guitar! I've yet to cut out the regions for the pickups and mounting rings; that will occur once I assemble the fully restored guitar, in order to get a perfect trim on the pick guard. I tried to finish it with just that touch of roughness, that would evoke the effects of time and use, so it would blend with the spirit of the instrument. Thanks for Stopping by! Please visit my site at Customguitars.com